Circular Column application: How to support the template of the viaduct
The practical application of the circular column forms is very extensive and extensive. The ancient building does not say that the architectural formwork such as gymnasiums and theaters also uses a large number of cylindrical wooden formwork. However, we have less information on how to use the viaducts for the viaducts. The use of wooden cylindrical formwork in the construction of viaducts can be quite a lot. Today we will talk about the application of the cylindrical formwork of the viaduct in detail. Some friends who are working on the bridge can refer to it.
Everyone knows that some conventional cylindrical template inner diameters are in the range of 250~1500MM, but the cylindrical specifications of the viaduct piers should be larger. Generally, the viaducts are multi-layered, upper and lower layers and even more layers, such as the Shuangling Road elevated in Linyi. The two-layer design is quite high for the bearing capacity of the pier. This is related to the safety of the entire project. It can't be sloppy. If the caster is cast with a general cylindrical sub-template, it will not work. This may happen in the formwork. In the case of explosion mode or slurry leakage, it is necessary to use a cylindrical template with a large diameter, and the strength of the template is large. More importantly, the construction is simple and convenient. If only the template is safe, it is very difficult to install. It is estimated that the construction personnel should give their opinions.
The coated cylindrical template produced by Fangyuan Building Mould is very suitable for the bridge cylindrical template. For custom large diameter cylindrical wood formwork thickness up to 22MM, reinforced steel belt 200MM one set of formwork is safer and stronger, bearing capacity up to 20.2KN It is more durable and sturdy than the ordinary template, and our template is waterproof, heat-insulating and corrosion-resistant. It will definitely touch the water for the bridge formwork construction. Our cylindrical wood formwork is not afraid of water, and it is safe to install underwater. Stable, the inner and outer surfaces are covered with a phenolic resin film layer. No matter whether it is used in any environment, there is no problem in the use of several templates. The viaduct cylindrical template is as simple as this!
Copyright © 2018 Square Circle Formwork
All rights reserved.