How to install wood circular column formwork by one worker
Many customers may not have used our wooden circular column formwork before, so it may not be very clear in terms of reinforcement. Today, Xiaobian hereby answers the questions about the reinforcement of wooden circular column formwork:
1. First of all, in the case of the formwork, the construction customer first uses the reinforced steel belt and the screw that we distribute to the customer free of charge to buckle the wooden circular column formwork into a full circle, and the base steel reinforcement is used for the foundation reinforcement. When reinforced, be sure to pay attention to the same degree of tightness of the upper and lower steel strips, and be careful not to have all the screws on a vertical line.
2. After the screws are tightened and the steel strips are reinforced, the construction customer must add 5*10cm of wood squares vertically around the formwork, and fix the wooden side with four steel pipes, and keep the spacing between the upper and lower steel pipes. 100cm is good, so that not only the wooden circular column formwork can be protected, but also the pressure of the vibrating bar can be buffered, so that the effect of the hitting concrete is better, and the protection is also advantageous for vertical positioning of the architectural circular column formwork, so that the force of the formwork is formed. A whole, to achieve the role of secondary reinforcement.
3. After concrete reinforcement, concrete pouring can be carried out; it is recommended that the customer has a diameter of less than 1200mm, and the height of 6 meters can be poured at one time; the column with a diameter of 1200mm or more, and the height of 6 meters should be poured twice.
Copyright © 2018 Square Circle Formwork
All rights reserved.